Mount Plus MP-APM-06-02 10 Pack Streaming Media Player Wall Mounting Bracket for Wide Range of Media Players, Cable and Satellite Boxes, Game Console Such As Apple TV, PS4,

Very easy to install, the hair tie is useless but over all happy with the product.

Can’t go wrong with the price! Easy to install, just a level, a drill, drywall anchors, and your are good to go! Very study how I have it displayed behind my TVYou can’t even tell it’s there

I wanted a way to get my 16" Macbook off the desk and away from my other junk. This worked great, lets the laptop breath, and people can see the artwork on the case. Includes some basic mounting hardware, but I grabbed a couple screws and washers from my parts drawer and used a stud finder to make sure this was properly supported for my laptop.

I wanted to use a RackSolutions wall mount but at almost $100 for the mount and shipping, I thought it was a little too much.This handy wall mount worked perfectly. I did place a piece of 2-sided tape on the inside before inserting the computer to keep it from popping out. I will definitely use this mount again. Perfect for the Dell USFF computers.My application was for a computer similar to this one: https://www.amazon.com/Dell-OptiPlex-780-Desktop-32-Bit/dp/B00OI78CWOComputer Dimensions: 9.3 x 9.4 x 2.6 in

I bought this when we redid our son's room. I wanted to keep everything clean and controlled to avoid the extra clutter. I saw a couple of others but settled on this one due to price and other reviews. This worked perfectly. Install was as easy as screwing in a couple of screws. Fit the Xbox One X perfectly. There is an added strap for stability, which is nice. Given what it is and what it does, I really couldn't ask for more.

I bought a pair of these brackets to mount a 20" x 14" x 2" DVR vertically to a the wall. One bracket is mounted below the DVR to hold its weight while the other is mounted above to hold the DVR against the wall (because the accompanying elastic straps don't instill confidence in their ability to fulfill this role properly). The DVR's legs keep the DVR from sliding out of the bracket sideways. My set-up is very stable and sturdy in this configuration. I'm deducting one star for two reasons:(1) The kit should have included rubber pads so the metal case of the electronic device doesn't make direct contact with the brackets' metal and get scratched. I stuck some felt pads on myself; but rubber pads would d a better job at preventing unwanted side-to-side movement.(2) Price tag seems a bit high for such a simple design.All in all, it does the job very well.

This was very easy to install. Can be done in 10-15 minutes. I would rate this product a little better if the bungee strap that it comes with secured your device better. It does hold, but it comes loose from the mounting edges to easy. Its basically a light bungee band that anchors to the ends of the mount via 2 small metal hooks. The hooks are too small to reliably hold the bungee in place. If your device gets pushed to far to one side the bungee pops off the hook and there goes your device. Also, the rubber bungee is kind of small and barely wrapped around my small LG blu-ray player. If you have a wide device the bungee will not work. I don't think the bungee is even long enough to wrap around a PS3. This could me your device may fall to the ground if your not careful. The adjustable depth plate works well, but it's not enough to hold your device secure. If you push your device to earthier side without the bungee it will most likely fall off unless you have it sandwiched really tight between the adjustable bracket plate. I will have to see if my blu ray player does not fall.At the end I am OK with the product since I only have a small cheap blu ray player. I would not trust this product with any expensive device like a PlayStation or X-Box etc.

The bracket I received - P/N #APM-06-01 - appears to be a fairly decent product for what it is, but the width capabilities claimed in both the Amazon listing and on the box are incorrect.The listing claims that the clamp will expand to 1.8" max width; this is correlated with a claimed 46mm max width on the box art. However, the actual maximum width of this bracket - at full extension - is ~39.5mm.