IANIYA Swivel Floor TV Stand Height Adjustable Bracket Entertainment Stand for 32 to 65 inch TV | 3-Tier BlackTempered Glass Multi-Function TV Stand

I bought it to hold up a 43" flat screen. The instructions are good and all parts and tools are provided.The unopened package is significantly heavy, but the finished stand is actually quite manageable. You assemble the lower portion upside down and you have to flip it over once you have the last glass plate attached. It isn't impossible for one person to flip it, but it's good to have help.Most of the parts are labeled. The parts that aren't labeled are duplicates of a labeled part, but parts are pretty unique by appearance (e.g. all 4's look alike).The only problem that I ran into was the rails that you mount on the back of the TV. You adjust the height of the TV by setting lifting the TV rail onto the back frame at the desired height. You then screw a locking bracket into the bottom of the back frame. There are two brackets that slide onto the left and right side bracket. The brackets, however, only fit the bottom most slots. The higher slots were slightly too wide. I had to use a pair of pliers to bend the locking slots into the proper width.So far, it is a good product.Read more

Love the productFits my 60”tv. I didn’t want to make holes in the wallMe and my daughter worked together to assemble it. Catalogue easy to read and tools are available

I used the instructions, and it went together easy. It took me about 40 minutes to assemble and mount TV, another 30 minutes hookup. (I use a Mac Mini to TV so there are other things that need to be plugged together)The TV is a good height.Feels strong and steady plus it looks great.It's everything I wanted though it would be nice to have the cables pulled through the TV pole, but one with that was more than I wanted to spend.All in All this was easy to assemble, seems strong and stable and looks great.

This TV stand is exactly what I wanted for my new condo. Assembly was not a problem but that’s only because I watched a couple videos online and allowed a few hours to complete. Take your time and stay organized. Very happy with purchase.

Well I wish I could write something here but I'm missing 1 piece that goes into the neck of the stand, #19. If/when I receive the part I'll update the review. Thankfully I didn't cut anything up or remove stickers yet. From what I see, everything else looks sturdy, the glass is fairly thick and heavy. The metal/aluminum shelf supports are intact, no dents. Just stinks, I tore my old stand down and was ready to put this together for movie night tonight. Looks like tv on the floor until this is resolved.Edit-18Oct20, --piece #19 was tucked inside #11 but not labeled. Which I only found out after I started building and really at the picture descriptions on the instructions. So the tv stand is now complete and I have to say I love the stand. It seemed a bit weak with the treaded rods being thin and not sure if I screwed them in all the way. But after adding the aluminum pieces and adding the weight I feel it is a solid piece. My 55"Samsung hung with the included bolts. I only needed someone's hand when flipping the glass tops over and when hanging the TV. It fits my sound bar, a PS4, my router, my record player, ADT panel, and internet provider box, and still room for other things on the shelves. My only gripe is that my cords are just a little short to run from back of the tv, through the wire management they provided, and to the power/surge strip. I'll have to figure something out because I had to place the optical sound and the cat-5 to the Fire Stick running outside the ziptie like thing they included. I'm thinking I'll run the power strip up the back and attach it between the 2 wire management clips, I'll just have to order longer fiber and make a longer cat-5 but I think if I attached the power to the rear it would look much better than what I got now! Also a good note, Customer Service emailed me same day as mine asking about the missing part. They sent 2 separate emails, stating that they were sending me the missing piece and apologized. I did email them back saying I'm an idiot and found the part I thought was missing, no need for the part to be shipped. I hope they got it. I increased my review to 4 stars because of the hidden and unlabeled #19.TLDR, this TV stand is worth the hassle so far, with only mislabeled pieces making it somewhat confusing during the build. Fits everything I need on the shelves with room to spare. Went together fairly quick with only needing help to flip the stand over, and then again to hang the TV. I'm kinda upset I waited so long to buy a stand like this. My only struggle is hiding the wires in the rear. 5 starsRead more

We received the package in less time than originally projected (which is always pleasant). The box had a small tear, but the components inside were undamaged.The English instructions were adequate although not completely sequenced correctly. It only required one redo. It took just under a hour for it to be set-up and functional.It looks nice as a unit, but it does show all of your wiring in the back. We put it in a corner and it works great for our 55 inch flat screen. The ability to swivel the screen is a very good feature.

This actually seems like a pretty decent television stand my only complaint: while some of the hardware is meticulously labeled with the proper part number some things are not labeled. So now you're trying to figure out what is what. in the end I was missing two caps to go on the bottom legs in the front of the stand so that it would be secure. I had to go to home Depot and Lowe's and I finally found something that I could modify that worked. I should not have had to go through that. But there was one bag with just all the smaller parts thrown in there with no labels and I think that's probably where my missing parts never got into that bag. Once I got past that installation was fine it's not a big problem it looks halfway decent I don't think it's worth $150 in my personal opinion. We'll see how it lasts over time but again a three-star rating because they need to be a little more careful about the products they're putting into the boxes and everything should have some kind of a label. if you can label ABCD but then not label e or f (or whatever) it doesn't help the person who's trying to put this stand together.